3/16" x 1 3/4" Concrete Screw

Wej-Con™ Hex Washer Head Concrete Screw

The Wej-Con™ 3/16" x 1 3/4" Hex Washer Head Concrete Screw delivers dependable anchoring power in concrete, masonry, and brick. Engineered from high-strength, case-hardened steel, it features twin-lead, v-notched threads for superior holding performance and easy installation.

Each screw is coated with R-Blocker™ corrosion protection, providing outstanding resistance to rust and salt spray exposure. The slotted hex washer head and gimlet point allow for smooth driving and secure fastening, while the included drill bit ensures proper hole sizing every time. These screws can also be removed and reinstalled as needed, offering flexibility on the job site.

Applications:

• Normal weight and lightweight concrete

• Solid and hollow masonry

Features & Benefits:

• High strength, case-hardened steel construction

• R-Blocker™ coating for corrosion resistance

• Slotted hex washer head with gimlet point

• Eliminates the need for inserts

• 5/16" drive size

• Includes drill bit (100 screws per box)

Installation Instructions

• It is recommended that a minimum of 1" and a maximum of 1-3/4" embedment be used in determining fastener length.
• The correct hole depth (B & C) can normally be obtained by drilling the full length of Wej-it^® carbide-tipped drill bit supplied with each box of Wej-Con^™ fasteners. In all cases, the hole must be at least 1/4" deeper than the depth of the fastener embedment.
• Normal safety precautions should be observed when drilling the holes to avoid electrical installations, other utilities and reinforcement bars.