GorillaWeld

All surfaces should be clean and free of debris. To improve adhesion, roughen smooth surfaces with sandpaper before gluing.

1. Remove cap from each tube and use top of cap to puncture foil seal.
2. Dispense equal parts from each tube onto a clean, disposable surface.
3. Mix with disposable mixing tool for approximately 20 seconds until color is uniform.
4. Apply mixture to surface within 3 minutes.
5. Clamp surfaces together and leave undisturbed for 10 to 30 minutes. Full cure in 24 hours. Cure time dependent on temperature, humidity and quantity applied.

*Note: Not recommended for use on polyethylene, polypropylene or similar plastics.