Introducing the Phason Plus Touch Series— The PEC Plus Redesigned
Upgrade your control system with the powerful and versatile Plus Touch Series. With a host of new features, this advanced system revolutionizes the way you monitor and control your environment.
More than just temperature monitoring
The Plus Touch Series goes beyond temperature control. It allows you to monitor additional factors like humidity, ammonia, and carbon dioxide. Using these conditions, it intelligently adjusts your equipment to optimize your environment. For example, if humidity levels rise, Plus Touch can activate heaters or increase ventilation to maintain the desired conditions.
VentGrid™ Merged Ventilation
Experience smoother transitions between ventilation stages with the VentGrid merged ventilation mode. Unlike traditional staged control, VentGrid offers up to four steps, ensuring more seamless adjustments for precise environmental management.
Growth and Minimum Ventilation Curves
Adapt to the changing needs of your animals effortlessly with the Growth and Minimum Ventilation Curves. These powerful features enable automatic adjustments to temperature set points and minimum ventilation rates as your animals grow, ensuring optimal conditions throughout their development.
Complete Programmability in Just 5 Minutes
Plus Touch offers a completely new user experience, designed for simplicity and efficiency. Gone are the buttons and LED displays—now, a 5-inch touchscreen provides an intuitive interface for configuring, programming, and monitoring your room and equipment. With Plus Touch, you can achieve your desired settings in as little as 5 minutes.
Don't worry about replacing your existing PEC Plus control boards. Plus Touch is fully backwards compatible with all earlier versions. Simply purchase a display upgrade kit, connect it to your current PEC Plus control board, and program your new control. Unlock all the exciting features of Plus Touch without the hassle of a complete system overhaul.
Key Features of Plus Touch:
- Automatic two-zone temperature control (range: -13 to 125°F / -25 to 51°C)
- VentGrid merged ventilation mode
- Traditional staged ventilation mode
- Two variable AC stages
- Four 0 to 10 V DC signal outputs (optional)
- Six pluggable general-purpose relays
- Relay staggering for distributing startup loads
- Alarm relay for external siren or alarm system
- Sensor inputs: 5x Phason 3K Temperature, 1x DOL-114 Temperature and Humidity, 3x inputs for compatible DOL sensors
- Growth and minimum ventilation curves
- Secondary control modifiers
- Easily updatable by USB
- Intuitive user experience
- 5-inch touchscreen display
- Control options include variable and fixed-stage ventilation, heating, cooling, and duty cycles
- Onboard diagnostics and self-tests
- Overload protection fuses
- Temperature sensor with extendable range (up to 500 feet)
- NEMA 4X enclosure (corrosion-resistant, water-resistant, and fire-retardant)
- CSA approval
- Limited warranty (2 years)
- Incoming power: 120/230 VAC, 50/60 Hz
- Variable AC stages: 10 A at 120/230 VAC (general-purpose resistive), 7 FLA at 120/230 VAC (PSC motor), 1/2 HP at 120 VAC, 1 HP at 230 VAC (PSC motor)
- Variable AC stage fuses: 15 A, 250 VAC ABC-type ceramic
- Variable DC stages (optional): 0 to 10 VDC, 2K O load
- Relay stages: 10 A at 120/230 VAC (general-purpose resistive), 1/3 HP at 120 VAC, 1/2 HP at 230 VAC, 360 W tungsten at 120 VAC
- Alarm relay: 0.4 A at 125 VAC, 2.0 A at 30 VDC (resistive load), 0.2 A at 125 VAC, 1.0 A at 30 VDC (inductive load)
Upgrade your control system to the Plus Touch Series today and experience the enhanced power, versatility, and user-friendly design it brings to your agricultural or industrial environment. Trust in the Plus Touch to deliver exceptional performance and keep your operations running smoothly.