IMPORTANT: HOW TO CHOOSE THE CORRECT REPLACEMENT SCREEN
The filter size is determined by the inlet and outlet pipe connection size on the filter body — where the water pipes connect to the filter.
Follow these steps:
Find the inlet and outlet connections. These are the threaded openings on each side of the filter body where the water supply pipes connect.
Identify the connection size. Your Rusco filter will have a nominal connection size of 3/4", 1", 1-1/2", or 2". This is the pipe size, NOT the outside diameter measured with a ruler.
Select the replacement screen that matches your filter size. The 3/4" and 1" filters use the same replacement screen.
Remove your existing screen and compare its dimensions with the measurements below.
NOTE: The 3/4" and 1" replacement screens are interchangeable. They are the SAME SIZE.
Filter size = Nominal size of the water pipe connections on the filter body.
Screen size = Actual length and diameter of the removable screen element.
Clear housing size = DO NOT use this measurement to select your replacement screen.
SEE THE PHOTO ABOVE FOR HELP IDENTIFYING WHERE TO MEASURE.
Replacement polyester screens are designed for Rusco Spin Down Filters. Verify your filter connection size or compare your existing screen dimensions before ordering.